Samsung RR39M7 Series Service Manual page 49

DISASSEMBLY & REASSEMBLY
PART NAME FIGURE DESCRIPTION
12-2. Using a 12mm wrench, remove the nut on the back.
12-3. Using a Phillips screwdriver, remove the shaft and
assemble to the other side.
12-4. Screw the nut the bolt on the back.
DOOR Reversing
13. Screw the hinge low and foot to the other side and pull
up the cabinet.
14. Using a 10mm wrench, change the spindle direction of
the hinge shaft.
15. Unscrew and remove the cover control front.
Note
Remove it by pulling the hooked part from the inside.
49