Table of Contents
Advertisement
IrDA Connector
IRTX
Ground
IRRX
N. C.
VCC
Connect the cable connector from your IrDA module to the IrDA
connector (J1).
Note:
The sequence of the pin functions on some IR cable may be
reversed from the pin function defined on the system board.
Make sure to connect the cable connector to the IrDA
connector according to their pin functions.
BIOS Setting
Configure IrDA in the Integrated Peripherals submenu ("Super IO
Device" field) of the BIOS.
Driver Installation
You may need to install the proper drivers in your operating system
to use the IrDA function. Refer to your operating system's manual or
documentation for more information.
5
1
Hardware Installation
2
51
Advertisement
Table of Contents
