Table of Contents
Advertisement
q
z
x c
v
b
n m
Winding the bobbin
NOTE:
bobbin winding.
z Draw the thread from the spool and pass the thread
around the bobbin winding tension disk.
q Bobbin winding tension disk
x Thread through the hole in the bobbin from the inside
to the outside.
c Put the bobbin on the bobbin winder spindle.
v Push the bobbin to the right.
w
The bobbin icon appears on the LCD display.
w Bobbin icon
b With the free end of the thread held in your hand, start
few layers, and then cut the thread close to the hole in
the bobbin.
n
will stop spinning automatically.
original position by moving the spindle to the left.
NOTE:
Do not move the bobbin winder spindle while the
machine is running.
m Remove the bobbin. Cut the thread as shown.
Return the speed control slider position.
16
Advertisement
Table of Contents
