Table of Contents
Advertisement
Installing the Device
2.5.2 Wiring Examples
4.
5.
2.5.2
Wiring Examples
The following illustrate how to connect single and dual power supplies to the device.
HI Power Supply Configurations
Figure 2.12
18
Connect the chassis ground screw to ground (Potential Earth). It is
recommended to terminate the ground connection with an M4 ring or spade
lug, and then torque to 1.7 N·m (15 lbf-in).
M4 Screw
1
M4 Ring Lug
2
Figure 2.11
Chassis Ground Connection
Connect the external power supply to a power source. The Power LED on the
device will turn green when power is being supplied to the device.
Single HI AC Power Input
Configuration
1
2
Figure 2.13
Single HI DC Power Input
Configuration
Installation Manual, 04/2023, C79000-G8976-1490-07
RUGGEDCOM RST916C
Advertisement
Table of Contents
