Table of Contents
Advertisement
Installing Device
2.6.3 Wiring Examples
4.
5.
6.
2.6.3
Wiring Examples
The following illustrate how to connect power to single and dual power supplies.
18
1
3
3
3
4
Screw-Type Terminal Block
1
Pluggable Terminal Block
2
Jumper
3
Terminal 4 (Chassis Ground)
4
Terminal 5 (+/L)
5
Terminal 7 (-/N)
6
Chassis Ground Terminal
7
Figure 2.7
Terminal Block Wiring
Connect the negative wire from the power source to terminal 7 (-/N) on the
terminal block.
If the external PoE power supply features a chassis ground connection, connect
the ground terminal on the power supply to terminal 4 on the terminal block.
DANGER
Electrocution hazard – risk of death, serious personal injury and/or damage
to the device
Make sure the supplied terminal block cover is always installed before the
device is powered.
Install the terminal block cover.
2
3
4
1
Installation Manual, 11/2022, C79000-G8976-1019-11
RUGGEDCOM RS416P
Advertisement
Table of Contents
