Advertisement
Contents
Connections
0 When "TV Input" is set in the menu, this unit automatically turns on when the TV
connected to the unit is turned on, and the input source switches to "HDMI ARC",
"Coaxial", "Optical 1" or "Optical 2". (v p. 84)
0 If you connect your TV via the Optical or Coaxial connection, this unit cannot be
put to standby when you turn off your TV. If you want to automatically put this
device on standby, set "Auto-Standby" in the settings menu. (v p. 86)
NOTE
0 Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes
noise and could damage the speakers.
0 Only the PCM 2-channel setting can be used to play sound from a TV via the ARC
function. Set "PCM 2ch" as the audio format in the TV settings.
o Specifications of supported audio formats
See "D/A converter" (v p. 124).
o HDMI control function
Connect this unit to a TV that supports the HDMI control function with
an HDMI cable and enable the HDMI control setting on the TV to
perform basic operations on this unit (changing the input source,
turning the power on and off, adjusting the volume) with the remote
control of the TV.
Refer to "About HDMI" (v p. 128) for more information about the
HDMI control function.
Front panel
Rear panel
Playback
Settings
47
Remote control
unit
Tips
Index
Appendix
Advertisement
