Advertisement
Contents
Connections
Cannot connect to a WPS Router.
Check that the WPS mode of the router is operating.
0
Press the WPS button on the router and then press the ENTER button within 2 minutes.
0
A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to "None", WPA-PSK (AES) or WPA2-PSK (AES).
0
(v p. 95)
If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the WPS button on the router. In this case, use the "Auto-
0
Scan" or "Manual" method to connect.
Cannot connect to the network using iPhone/iPod touch/iPad.
Update the iPhone/iPod touch/iPad firmware to the latest version.
0
When configuring the settings via a wireless connection, iOS 10.0.2 or later needs to be supported.
0
Cannot connect to the network during standby.
Set "Network Control" of the settings menu to "On". If "Network Control" is set to "Off", the network function is suspended during standby. (v p. 93)
0
Front panel
Rear panel
Playback
Settings
117
Remote control
unit
Tips
Index
Appendix
Advertisement
