Advertisement
Contents
Connections
Music files on PC or Mac cannot be played back (USB-DAC)
This unit is not recognized on the computer.
Reconnect the USB cable to the USB port on your computer. When this unit is still not recognized after reconnection, connect to a different USB port.
0
(v p. 25)
Restart your computer.
0
Check the OS of your computer. (v p. 48)
0
When your computer is running on Windows, a dedicated driver software should be installed. (v p. 49)
0
This unit is not selected as the playback device.
Select this unit as the playback device in the sound settings on the computer. (v p. 48)
0
"Signal Unlock" is displayed.
When digital audio signals cannot be detected properly, "Signal Unlock" is displayed. (v p. 56)
0
"Unsupported" is displayed.
"Unsupported" is displayed when audio signals that are not supported by this unit are input. Check the settings on your computer or player software.
0
(v p. 56)
If the computer you use is macOS, please check if the DNP-2000NE format is set below 384.0 kHz using the Audio MIDI Setup. (v p. 55)
0
Front panel
Rear panel
Playback
Settings
118
Remote control
unit
Tips
Index
Appendix
Advertisement
