Table of Contents
Advertisement
• If the test failed, correct the failure, and then rerun the test.
• If the test reported no failures, select Reboot from the menu to reboot the system.
Completing the replacement process
After you replace the part, you can return the failed part to Lenovo, as described in the RMA instructions
shipped with the kit.Contact technical support at
additional help with the replacement procedure.
P P r r o o c c e e d d u u r r e e
Step 1.
Recable the system storage and networking cables, as needed.
Step 2.
Reconnect the power supply.
a.
Open the power cable retainer and plug the power cable into the power supply.
b.
Plug the power cable into the power source.
Step 3.
Return the node to normal operation by giving back its storage from the running node: storage
failover giveback -ofnode impaired_node_name
Note: This operation need to be performed when the impaired node shows "Waiting for
giveback...".
Step 4.
If automatic giveback was disabled, reenable it: storage failover modify -node local -auto-
giveback true
ThinkSystem DM5100F Hardware Installation and Maintenance Guide
86
Lenovo Data Center Support
if you need the RMA number or
Advertisement
Table of Contents
