Installing The Wall-Hanging Bracket - Panasonic TX-40HX820E Operating Instructions Manual

6
7
Note
Remove the protective sheet and the protective film
after installing the pedestal.
Removing the pedestal
Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screws
B
from the TV.
from the bracket.
Installing the wall-
hanging bracket
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
Holes for wall-hanging bracket installation
Rear of the TV
a
(View from the side)
Depth of screw
40-inch model
minimum: 9 mm
maximum: 11 mm
50-inch model
minimum: 8 mm
maximum: 20 mm
58-inch model
minimum: 9 mm
maximum: 22 mm
65-inch model
minimum: 10 mm
maximum: 22 mm
Diameter: M6
Screw for fixing the TV onto the
wall-hanging bracket (not supplied with
the TV)
Warning
Using other wall-hanging brackets, or installing a wall-
hanging bracket by yourself have the risk of personal
injury and product damage. In order to maintain the
unit's performance and safety, be absolutely sure to
ask your dealer or a licensed contractor to secure
the wall-hanging brackets. Any damage caused by
installing without a qualified installer will void your
warranty.
Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
40-inch model
a: 200 mm
b: 200 mm
b
50-inch model
58-inch model
65-inch model
a: 400 mm
b: 200 mm
English
11