Panasonic Panaboard UB-5310 Operating Instructions Manual page 34

3
Collapse the carton box.
Remove the tape and the staples on
the unopened side of the carton box,
then collapse the box.
Remove the tape and the staples.
Top
Bottom
4
Remove the protective plastic bags.
Remove the protective plastic bag
from the screen unit and printer unit.
Set those units on the top of collapsed
shipping box and remove the
cushions.
Cushions
Caution
• Touch the screen film surface gently to avoid
any damage.
5
Attach the screen unit to the
optional stand or wall mounting
fixture.
■ If you are using the stand, refer to
page 42.
■ If you are using the wall mounting
fixture, refer to page 46.
34
6
Carton
Cover (left)
Protective
plastic bag
7
Screen unit
Cushions
Caution
• Remove the lower shipping screw first.
Hang the screen unit to the board
attachment (upper).
Hold the side covers of the screen unit
and hang two hooks of the screen unit
on the left side of the board
attachment (upper).
Shift the screen unit to the left until it
stops. Confirm the left hook is inserted
into the groove of the board
attachment (upper).
• When hanging the screen unit, set the board
attachment frame at the lowest level.
• Be careful not to catch the screen film on the
board attachment frame.
Cover (right)
Remove the shipping screws.
Remove the lower and upper shipping
screws on the folded screen.
Board attachment
(upper)
Board
attachment
Frame