Panasonic Panaboard UB-5310 Operating Instructions Manual page 20

Computer Interfacing
Windows 2000
1
Power on your computer and start
Windows.
• Log on as an administrator.
2
Power on the electronic board, and
connect the unit and your computer
with a USB cable.
3
When "Welcome to the Found New
Hardware Wizard" dialog box appears,
click the [Next] button.
4
When "Panaboard-UB5 USB Device"
is detected, click on the "Search for a
suitable driver for my device
(Recommended)" check button and
click the [Next] button.
5
Insert the CD-ROM into the CD-ROM
drive. When the Setup window appears,
click the (close button) to close it.
6
Select the "Specify a location" only,
then click the [Next] button.
• Do not select the CD-ROM drive. It may
cause installing a wrong USB driver.
7
Specify "E (CD-ROM drive letter):
\UB-5xxx\UsbDrv\Win2K-XP" in the
text box, and click the [OK] button.
8
When the driver is found, click the
[Next] button.
20
9
Although "Digital Signature Not
Found" dialog box appears, click the
[Yes] button to continue the installation.
10
When the installation of "Panaboard-
UB5 USB Device Driver" is
completed, click the [Finish] button.
11
When "Welcome to the Found New
Hardware Wizard" dialog box appears
again, click the [Next] button.
12
When "Unknown" is detected, click on
the "Search for a suitable driver for
my device (recommended)" check
button and click the [Next] button.
13
Select the "Specify a location" only,
then click the [Next] button.
• Do not select the CD-ROM drive. It may
cause installing a wrong USB driver.
14
Confirm that the "Copy
manufacturer's files from:" is the
same as step 7, click the [OK] button.
15
When the driver is found, click the
[Next] button.
16
Although "Digital Signature Not
Found" dialog box appears, click the
[Yes] button to continue the installation.
17
When the installation of "Panaboard-
UB5 USB Printer (Letter)" driver is
completed, click the [Finish] button.
• The standard printer name is "Panaboard-UB5 USB
Printer (Letter)".