Panasonic Panaboard UB-5310 Operating Instructions Manual page 18

Computer Interfacing
Windows Me
1
Power on your computer and start
Windows.
2
Power on the electronic board, and
connect the unit and your computer
with a USB cable.
3
When "Panaboard-UB5 USB Device"
is detected, click on the "Specify the
location of the driver (Advanced)"
check button and click the [Next]
button.
4
Insert the CD-ROM into the CD-ROM
drive. When the Setup window appears,
click the (close button) to close it.
5
Select the "Specify a location:" only,
then specify "D (CD-ROM drive letter):
\UB-5xxx\UsbDrv\Win98-Me" in the
text box, and click the [Next] button.
• Do not select the CD-ROM drive. It may
cause installing a wrong USB driver.
6
When the driver is found, click the
[Next] button.
7
When the installation of "Panaboard-
UB5 USB Device Driver" is
completed, click the [Finish] button.
8
When "Panaboard-UB5 USB Printer"
is detected, click on the "Specify the
location of the driver (Advanced)"
check button and click the [Next]
button.
18
9
Confirm that the "Specify a location:"
is the same as step 5, click the [Next]
button.
10
When the driver is found, click the
[Next] button.
11
When the installation of "USB Printing
Support" is completed, click the
[Finish] button.
12
When "PanasonicPanaboard-UB5
USB Printer (Letter)" is detected, click
on the "Specify the location of the
driver (Advanced)" check button and
click the [Next] button.
13
Confirm that the "Specify a location:"
is the same as step 5, click the [Next]
button.
14
When the driver is found, click the
[Next] button.
15
Follow the on-screen instructions when
the "Add Printer Wizard" executes.
16
When the installation of "Panaboard-
UB5 USB Printer (Letter)" driver is
completed, click the [Finish] button.
• A floppy disk or CD-ROM for installing the operating
system will also be necessary. (See page 19.)