One-Touch Dialing - Panasonic KX-TD500 User Manual

4.3.52 One-Touch Dialing

Allows you to make a call (intercom or outside) or access a system feature with the touch of a
button. This is done by storing an extension number, telephone number or feature number (up
to 24 digits) in a One-Touch Dialing button.
Dialing
PT
Lift the handset or press
SP-PHONE/MONITOR.
Conditions
•
One-Touch Dialing button can be programmed by Station, User or System Programming.
•
If you store the telephone number of an outside party, a CO line access code (9, 801 through
848) must be stored as the leading digit.
•
You may press a CO button to select a desired CO line directly before pressing the One-
Touch Dialing button.
•
Combination dialing
Speed Dialing, One-Touch Dialing, manual dialing, Last Number Redial and Saved
Number Redial can be used in a combination.
•
Storing more than 25 digits
It is possible to store a number consisting of 25 digits or more by dividing it and storing it
in two One-Touch Dialing buttons. In this case, a CO line access code (9, 801 through 848)
should be stored in the first button.
•
Full One-Touch Dialing
If "Full One-Touch Dialing" is enabled, press the One-Touch Dialing button directly
without going off-hook.
• Any feature number can be stored in a One-Touch Dialing button.
However, the feature numbers for "Speed Dialing – Station" and "Speed Dialing – Station
Programming" do not function.
User Manual
(CO)
Press One-Touch Dialing
Press CO, if required.
(Flexible button).
Station Features and Operation (PT/SLT)
(One-Touch)
323