Table of Contents
Advertisement
" Installing the KX-HGC200 to a Computer
4
In the PCMCIA socket list, confirm
by the PCMCIA socket.
?
mark
≥If
properly installed. Refer to the manual of your computer and re-install the
proper device driver first, then insert the KX-HGC200.
[Close]
5
Click
[OK]
6
Click
To save the boot up time when the Ethernet adapter is
attached or equipped to your computer
If the Ethernet adapter that is attached or equipped to your computer
works with the KX-HGC200 at the same time, the boot up time of the
computer may take a few minutes. To save the boot up time, remove or
disable the Ethernet adapter following its manual or the computer's
manual.
26
!
or
mark is followed, device driver of the PC card socket is not
.
to close the window.
?
!
mark or
mark is not followed
Advertisement
Table of Contents
