Table of Contents
Advertisement
Inserting the KX-HGC200 in the Broadband
Networking Gateway
1
Make sure the Broadband Networking Gateway and other devices
connected to it are turned off.
2
Open the cover on the front side of the Broadband Networking
Gateway.
3
Insert the KX-HGC200 into the PC card slot of the Broadband
Networking Gateway making sure that the "Panasonic" side is facing
toward you and the arrow mark on the KX-HGC200 is pointing
toward the slot.
Arrow mark
Notes:
≥Be sure to insert the KX-HGC200 firmly until you hear the click.
≥Insert in the proper direction to prevent device from being
damaged.
For assistance, please call: 1-800-272-7033
"
15
Advertisement
Table of Contents
