Bard MULTI-TEC W18AAPA Installation And Service Instructions Manual page 50

WALL-MOUNT UNIT ARCHITECTURE (CONT.)
Screen Menu Item
Press DOWN Key
C6 Freeze Sensor
Channel 7
Raw
Enable
Filter Intensity
Offset
Value
End of I/O CONFIG
Press BACK Key
Press DOWN Key
D ON/OFF
End of ON/OFF
Press BACK Key
Press DOWN Key
E ALARM LOGS
Record Number
Time
Date
Description
Event
NOTE: Alarm log will have as many screens as events occurred using same format.
End of ALARM LOGS
Press BACK Key
Press DOWN Key
F SETTINGS
Date/Time
Date/Time Change
Time
Format
Day
Month
Year
Press DOWN Key
Timezone
Current
New Timezone
Update Timezone
Manual 2100-665A
Page 50 of 51
Range Default Value
-999.9 to 999.9 -0.1
On/Off On
0-10 5
-999.9 to 999.9 0.0°F
-999.9 to 999.9 303.0°F
On/Off On
0-99
00:00 to 23:59
00/00/00 -
12/31/99
Text
Start/Stop
00:00 to 23:59
MM/DD/YY,
DD/MM/YY, DD/MM/YY
YY/MM/DD
0-31
0-12
Reykjavik
No/Yes No
Description
Heading
Descriptive text
Raw value of input
Used to enable/disable the sensor
Used to increase or decrease the filter
for input
Offset applied to input
Display value of input
Allows cooling or heating operation
Menu item
Record number (located in upper right
-
corner)
- Time of alarm event
- Date of alarm event
- Description of alarm event
Describes if entry is beginning or end of
-
event
Menu item
Enter new time
Sets the display format of the date
Enter new day
Enter new month
Enter new year
Displays current timezone
Enter new timezone
Set to yes to apply new timezone