Table of Contents
Advertisement
or ABOVE 40°C (104°F). This is very
important in order to maintain optimal
condition of the battery pack.
17) Do not incinerate the battery pack. It
can explode in a fire.
18) Avoid dangerous environment. Do not
use charger in damp or wet locations.
19) The charger is designed to operate on
standard household electrical power
only. Do not attempt to use it on any
other voltage!
20) Do not abuse cord. Never carry charger
by cord or yank it to disconnect from
outlet. Keep cord away from heat, oil
and sharp edges.
21) Charge the battery pack in a well ven-
tilated place, do not cover the charger
and battery pack with a cloth, etc., while
charging.
22) Use of an attachment not recommend-
.FUNCTIONAL DESCRIPTION
FUNCTIONAL DESCRIPTION
(A)
(C)
(D)
(E)
(A) 6.35 mm (1/4") hex quick connect chuck (E) Battery pack (EY9200)
(B)
Forward / Reverse lever
(C) Variable speed control trigger
(D) Bit holder
ed may result in a risk of fire, electric
shock, or injury to persons.
23) Do not short the battery pack. A battery
short can cause a large current flow,
over heating and create the risk of fire
or personal injury.
24) NOTE: If the supply cord of this ap-
pliance is damaged, it must only be
replaced by a repair shop authorized by
the manufacturer, because special pur-
pose tools are required.
25) TO REDUCE THE RISK OF ELEC-
TRIC SHOCK, THIS APPLIANCE HAS
A POLARIZED PLUG (ONE BLADE IS
WIDER THAN THE OTHER).
This plug will fit in a polarized outlet
only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified elec-
trician to install the proper outlet. Do not
change the plug in any way.
(G)
(B)
(F)
(F) Battery pack release button
(G) Battery charger (EY0110)
- 5 -
Advertisement
Table of Contents
