Table of Contents
Advertisement
Troubleshooting
Symptoms related to memory
Symptom
$ What is displayed as the memory
size differs from the size of the
memory actually provided.
$ At startup, the memory check
keeps running, and operation fails
to advance to the next step.
$ The main unit's internal VTR
cannot be controlled from the
editing application program.
$ The external VTR cannot be
controlled
from
application program.
O Has the memory been increased inappropriately or has the memory
insertion slot been changed?
When the product is shipped, two 128 MB DIMM memory boards
yielding a total memory size of 256 MB are installed.
"262144 KB" appears as the memory check display during startup.
<Note>
When changing the memory board, consult your dealer and use the
memory board specified.
O Has the system's Internal VTR been selected as the setting for the
device to control the editing application program?
If any other setting (such as External VTR) has been selected for this
device, the internal VTR will not operate even when the on-screen
control buttons are clicked.
O Has a tape been loaded into the main unit's internal VTR?
The main unit's internal VTR cannot be controlled when no tape has
been loaded into it or when its tape has been ejected.
O Has the connecting cable for controlling the external VTR been
the
editing
connected properly?
The external VTR cannot be controlled if the RS-422A 9-pin control
cable (option) has not been connected or if an error is made in the
connectors which have been connected.
For details on the connections, refer to the main unit's rear panel
connection diagram. (See page 14)
O Has "remote control" enable been set as the external VTR setting
mode?
For details on the remote control mode settings, refer to the manual
accompanying the external VTR.
O Has External VTR been selected as the setting for the device to
control the editing application program?
If Internal VTR has been selected as the setting for this device, the
external VTR will not operate even when the on-screen control
buttons are clicked.
O Has a tape been loaded into the external VTR?
The external VTR cannot be controlled when no tape has been
loaded into it or when its tape has been ejected.
Suggested remedial action
– 24 –
Advertisement
Table of Contents
