Instrument and control functions
GEAR
N
1. Damping force setting
2. Damping force setting level
TIP
4
If the preload setting was not complet-
ed correctly:
The damping force setting and
setting level will flash 4 times and
cannot be adjusted if you try to
adjust them while the vehicle is
stopped.
The preload setting pictogram will
flash and the damping force can-
not be adjusted if you try to adjust
it while the vehicle is moving.
Be sure that the preload has been set
correctly before adjusting the damping
force.
To adjust the damping force and
damping force setting level
1. Turn the main switch on.
2. Push the menu switch to switch
the function display to the damp-
ing force adjusting function.
HARD
1
+3
2
GEAR
N
1. Function display
2. Damping force adjusting function
3. Use the select switch to select
"HARD", "STD" or "SOFT".
GEAR
N
HARD
1. Damping force setting
4. Push the menu switch.
5. Use the select switch to select the
desired level for the damping
force setting.
GEAR
N
HARD
1. Damping force setting level
4-42
1
2
STD
0
1
0
+3
1