Clutch Lever - Yamaha FJR1300AE 2020 Owner's Manual

NOTICE
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
Cruise control switches
See page 4-6 for an explanation of the
cruise control system.
Menu switch "MENU"
This switch is used to make setting
changes within the multi-function me-
ter unit. (See page 4-9.)
Select switch "
This switch is used to make setting
changes within the multi-function me-
ter unit. (See page 4-9.)
Drive mode switch "MODE"
WARNING
Do not change the D-mode while the
vehicle is moving.
Using this switch changes the drive
mode to touring mode "T" or sports
mode "S".
The throttle grip must be completely
closed in order to change the drive
mode.
The selected mode is shown on the
drive mode display. (See page 4-11.)
The drive mode cannot be changed
while the cruise control system is oper-
ating.
Instrument and control functions
ECA10062
EAU12781
EAU54232
EAU54222
/ "
EAU54691
EWA15341

Clutch lever

4
1. Clutch lever
2. Clutch lever position adjusting dial
3. Match mark
4. Distance
The clutch lever is located on the left
side of the handlebar. Pull the clutch
lever to disengage the engine from the
drivetrain. Release the lever to engage
the clutch and transmit power to the
rear wheel.
TIP
 The lever should be pulled rapidly
and released slowly for smooth
shifting. (See page 6-3.)
 The clutch lever is equipped with a
switch, which is part of the ignition
circuit cut-off system. (See page
4-45.)
The position of the clutch lever can be
adjusted. To adjust the distance be-
tween the clutch lever and the handle-
bar, gently push the lever away from
the handlebar and rotate the position
adjusting dial.
TIP
Make sure the setting number on the
position adjusting dial aligns with the
match mark.
4-23
1
2
3
EAU12833
4