Yamaha FJR1300AE 2020 Owner's Manual page 49

1. Rider seat holder cover
4. Install the rider seat height posi-
tion adjuster so that the "H" mark
is aligned with the match mark.
1. Rider seat height position adjuster
2. "H" mark
3. Match mark
5. Insert the projection on the front of
the rider seat into seat holder B as
shown.
1. Projection
2. Seat holder B (for high position)
3. Rider seat holder cover
Instrument and control functions
1
1. "H" position slot
To change the rider seat height to
the low position
1. Rider seat height position adjuster
2. "L" mark
3. Match mark
4-33
6. Align the projection on the bottom
of the rider seat with the "H" posi-
tion slot, and then push the rear of
the seat down to lock it in place as
shown.
7. Install the passenger seat.
1. Remove the rider seat. (See page
4-31.)
2. Remove the rider seat height posi-
tion adjuster by pulling it upward.
3. Move the rider seat holder cover
to the upper position.
4. Install the rider seat height posi-
tion adjuster so that the "L" mark
is aligned with the match mark.
4