Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Pentair Manuals
  4. Cables and connectors
  5. CodeLine 40E60
  6. User manual

Pentair CodeLine 40E60 User Manual

Brackish ro pressure vessels
Hide thumbs Also See for CodeLine 40E60:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
CodeLine_Vessel_40E60_user_D500
40E60 Brackish RO Pressure Vessels
DANGER - HIGH PRESSURE DEVICE
Do…
Do…
Do…
Do…
Do…
The 40E60 RO Pressure Vessel Housings
40E60 User Guide Rev A Updated 05/26/2000 ECN 8620
User's Guide
Important Safety Precautions
Replacing Elements
General Information
Product Bulletin 526004 Rev. A
Do not…
Do not…
Do not...
Do not…
Do not…
Do not…
Do not…
Do not

Advertisement

loading

Related Manuals for Pentair CodeLine 40E60

Summary of Contents for Pentair CodeLine 40E60

  • Page 1 CodeLine_Vessel_40E60_user_D500 Product Bulletin 526004 Rev. A 40E60 Brackish RO Pressure Vessels User's Guide DANGER - HIGH PRESSURE DEVICE Important Safety Precautions Do not… Do… Do not… Do not... Do… Do not… Do… Do not… Do… Do not… Do not… Do… Replacing Elements Do not General Information...

  • Page 2: Installation

    Installation SECTION THROUGH END CLOSURE Dwg Ref Qty Per Item # Description Materials Shell Shell Filament Wound epoxy/glass composite. Head locking grooves internally wound in place. Shell exterior coated with white high gloss polyurethane paint. Head 50420 End Plug 50440 Bearing Ring Nickel Plated Alloy Steel 45317 Plug Seal Ethylene Propylene O-ring...
  • Page 3 Product Bulletin 526004 Rev. A Opening The Vessel WARNING Relieve pressure from vessel before beginning this procedure. Contamination Removal Removing the Head The head assembly is shown in figure 1. CAUTION DO NOT tap on fittings as this could damage ports.

  • Page 4: Replacing Elements

    Replacing Elements CAUTION System malfunctions and element Removing Elements damage may result if elements are installed in the wrong direction. Opening the Vessel. Note Always remove and install element in the direction of feed flow. The feed end (upstream end) is the end plumbed most directly to the pump.
  • Page 5 Product Bulletin 526004 Rev. A Closing the Vessel See refurbishing Parts. Caution DO NOT pressurize vessel without NOTE element(s) properly installed. Glycerine is a commercially available lubricant that will not foul elements. However silicone lubricant is recom- mended for this application Refur- bishing Parts If threading fittings into end plug, avoid...
  • Page 6 Product Bulletin 526004 Rev. A Refurbishing Parts Inspecting Parts Refurbishing Other Parts Plastic parts: Metal parts: Note Remaking Pipe Connections to End Epoxy paint can be used to seal slightly Plug damaged anodized areas whiule waiting a replacement part Vessel Locking Ring Groove- Closing the Vessel Bearing Ring End Plug...