Listening To Recorded Messages Using The Base Unit - Panasonic KX-FPG371 Operating Instructions Manual

Listening to recorded messages using the base
unit
{ERASE}
{RECORD}
{>}{+}{-}
{SET}
{STOP}
1
Press { { { { > > > > } } } } 2 times.
2
Press { { { { + + + + } } } } or { { { { - - - - } } } } until the desired mailbox
number is displayed.
Example:
3
Press { { { { PLAY MESSAGES} } } } .
If you have programmed your own mailbox
password, enter it.
L Only the new recorded messages will
be played.
L If there are no new messages, the unit
will play back all the recorded
messages.
4
Press { { { { STOP} } } } to end the operation.
Microphone
{PLAY MESSAGES}
MAILBOX [+ -]
NEW MESSAGES
MAILBOX2 [±] 02
b
PRESS
REC/ERASE/PLAY
PASSWORD=
Voice Mailbox
Note:
L The following features can be used during
playback. See page 74, 75 for details.
– To repeat a message
– To skip a message
– To stop playback
– To change the playback speed
– To erase a specific message
To record a memo message into a mailbox
1. Press { { { { > > > > } } } } 2 times.
2. Press { { { { + + + + } } } } or { { { { - - - - } } } } until the desired mailbox
number is displayed.
Example:
3. Press { { { { RECORD} } } } .
L A long beep will sound.
Example:
4. Speak clearly about 20 cm (8 inches) away
from the microphone.
5. When finished recording, press { { { { STOP} } } } .
To erase all the messages in a mailbox
1. Press { { { { > > > > } } } } 2 times.
2. Press { { { { + + + + } } } } or { { { { - - - - } } } } until the desired mailbox
number is displayed.
Example:
3. Press { { { { ERASE} } } } .
4. Press { { { { SET} } } } .
MAILBOX [+ -]
MAILBOX1 [±] 00
b
PRESS
REC/ERASE/PLAY
BOX1 RECORDING
MAILBOX1 [±] 01
b
PRESS
REC/ERASE/PLAY
BOX1 ERASE OK?
YES:SET/NO:STOP
81