Listening To Recorded Messages; Incoming Messages - Panasonic KX-FP155 Operating Instructions Manual

Incoming Messages

Listening to recorded
When the unit has recorded new voice messages:
—the MESSAGE light will flash,
—the call counter will show the total number of recorded messages, and
—slow beeps will sound if the message alert feature is activated (feature #42 on page 66).
Example:
Press PLAY MESSAGES
Only the new recorded messages will be
played.
Adjust the speaker volume using
.
After playing back all of the new messages,
the MESSAGE light will stop flashing but will
remain lit up.
If you press PLAY MESSAGES
time, all the recorded messages will be
played.
Repeating a message
Press while listening to the message.
If you press within 5 seconds of the
beginning of the message, the previous message
will be played.
To play back a specific message, press
and search for the message you want to
listen to.
Skipping a message
Press to play the next message.
Stopping playback
STOP
Press .
If you press PLAY MESSAGES
the unit will resume playing the rest of the
messages.
Voice time/day stamp
During playback, a synthesized voice will
announce the time and day of the week that each
message was recorded.
50
messages!
02
Call counter
.
or
at this
or
within 1 minute,
Display
PLAY MESSAGES
ERASE
SLOW
QUICK
MESSAGE
FLASH/LIGHT
Changing the playback speed
Press QUICK to play messages at one and a
half times the original speed.
Press to play messages at half the
SLOW
original speed.
To return to the original speed, press
again during quick or slow playback.
SLOW
Erasing all of the recorded messages
Check that you have listened to all of the recorded
messages.
1. Press ERASE .
Display:
2. Press
SET
.
3. Press .
SET
To erase a specific message, press
while listening to the message you want to erase.
SET
STOP
QUICK or
ALL MESSAGES
PRESS SET
ERASE MESSAGES?
YES:SET/NO:STOP
ERASE