Control Character Output; Keyboard Modifiers - Honeywell HF680 Series User Manual

Control Character Output

This selection sends a text string instead of a control character. For example, when
the control character for a carriage return is expected, the output would display
[CR] instead of the ASCII code of 0D. Refer to
1252)
the chart). Default = Off.
Note: Control + ASCII Mode overrides this mode.
Control Character Output On

Keyboard Modifiers

This modifies special keyboard features, such as CTRL+ ASCII codes and Turbo
Mode.
Control + ASCII Mode On:
characters for values 00-1F. Windows is the preferred mode. All keyboard country
codes are supported. DOS mode is a legacy mode, and it does not support all
keyboard country codes. New users should use the Windows mode. Refer to
Conversion Chart (Code Page
Windows Mode Prefix/Suffix Off: The scanner sends key combinations for ASCII
control characters for values 00-1F, but it does not translate any prefix or suffix
information.
Default = Control + ASCII Mode Off.
20
Convert All Characters
to Lower Case
on page 164. Only codes 00 through 1F are converted (the first column of
The scanner sends key combinations for ASCII control
ASCII Conversion Chart (Code Page
1252), page 164 for CTRL+ ASCII Values.
Convert All Characters
to Upper Case
* Control Character Output Off
HF680 Series User Guide
ASCII