INDEX 1. SAFETY REGULATION ..........................6 2. LAYOUT AND ITEMS SUPPLIED ......................7 3. PROPER USE ............................8 4. TECHNICAL DATA ........................... 9 5. BEFORE STARTING THE EQUIPMENT ....................9 6. OPERATION ............................10 7. CLEANING, MAINTENANCE AND ORDERING OF SPARE PARTS ............. 10 8.
CAUTION! - Read the operating instructions to reduce the risk of inquiry. DANGER: When using the equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating instructions and safety regulations with due care. Keep this manual in a safe place, so that the information is available at all times.
damage. Please read the complete operating manual with due care. Keep this manual in a safe place so that the information is available at all times. If you give the equipment to any other person, give them these operating instructions as well. We cannot accept any liability for damage or acci- dents which arise due to a failure to follow these instructions and the safety information.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the equipment is used in commercial, trade or industrial businesses or for equivalent purposes. 4. TECHNICAL DATA Power: 18 V Vacuity: ≥...
5.4 Suction nozzles Dual-purpose nozzle (Fig. 9c) The dual-purpose nozzle (12) is for vacuuming solids and liquids over medium to large areas. Various attachments can be tted to the combination nozzle depending on what you sort of work you wish to carry out: Crevice nozzle (Fig.
6.4 Blowing Connect the suction hose (10) to the blow connector (9) on the wet and dry vacuum cleaner. 7. CLEANING, MAINTENANCE AND ORDERING OF SPARE PARTS DANGER: Always pull out the battery before starting any cleaning work. 7.1 Cleaning •...
10. DISPOSAL AND RECYCLING For EU countries only Never place any electric power tools in your household refuse. To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and its implementation in national laws, old electric power tools have to be separated from other waste and disposed of in an environment-friendly fashion, e.g.
Page 14
1. Handle 2. On/off switch 3. Lid 4. Screw 4.2*16 5. Battery pack box 6. Motor base 7. Screw 4.2*16 8. Motor top seal 9. DC motor 10. Bottom seal 11. Motor tray 12. Screw 4.2*16 13. Float valve 14. Float valve bracket 15.
WARRANTY CARD Product model Date of sale Company Serial number Client's signature Username The product is in good conditions and fully complete. Read and agree the terms of the warranty. GUARANTEE The warranty period starts from the date of sale of the products and covers 6 months for all power products. During the warranty period, free failures caused due to the use of poor-quality materials in the production and manufacturer workmanship admitted fault are removed.
Page 16
Manufactured under license of Daewoo International Corporation, Korea...