T9 Text Input; Shift Mode Change; Text Entry Mode Change - Panasonic EB-X300 Operating Instructions Manual

Shift mode change

In text entry mode, you can change mode by pressing and holding
Multi tap
abc Abc ABC

Text entry mode change

In text entry mode, to switch T9 mode on/off, press
Auto capital change
Auto capital affects Abc and T9Abc
When the entry mode is changed to Abc or T9Abc, the first character is input as
upper case and subsequent letters as lower case.
When one of the following characters [. (Period) or ! or ?] is input before a space,
the next character is input as upper case.
®
T9 Text input:
Using this mode of text entry dramatically reduces the required number of key
presses.
Press a key once for any letter you require on that key. The desired letter may
not be displayed. Continue pressing other keys until the end of a word is
reached, then check that the word has been typed correctly before continuing
on to the next word. If the combination of letters typed has produced a word
which is not the one you require, press
displayed. Then continue to the next word.
Example of Text entry in T9Abc Mode
To type a new message, follow these steps:
1. At the beginning of a new message, press and hold
previous text, if necessary
C
2. Press to change letter case, if necessary
% % ( (
3. Press
Basic Operations
18
123
.
A
. "Call" is displayed
Tegic
T9abc T9Abc
!
.
repeatedly until the correct word is
@
C
.
T9ABC 123
(Clear) to delete