Dtmf - Panasonic EB-X300 Operating Instructions Manual

Swap
When you are connected to two calls, you can switch between the active call
and the held call.
During a call:
@
(Swap) to switch to the other call on hold

DTMF

DTMF can be sent during a conversation. These are often used to access voice
mail, paging and computerised home banking. For example, you may need to
enter a number to remotely access voice mail messages. A phone number may
be stored in the Contacts together with a DTMF sequence, allowing the number
to be dialled upon recall and the DTMF sequence to be sent automatically.
To send DTMF during a call:
#
Enter digits (
Pause dial
Using pauses allows you to send DTMF automatically.
1. Enter the phone number
2. Press and hold
entered
3. Enter the DTMF digits after the pause, e.g. enter the number to access
voice mail messages
C
4.
➣ When the call is connected, the DTMF sequence will be sent after 3 seconds.
Basic Operations
16
, ! "
~ , or
#
until a "P" is displayed at the end of the phone number
).