Call Divert - Panasonic EB-G600 Operating Instructions Manual

Using Withhold ID it is possible to check if you send
Calling Line Identification information when you make a
call. When checking the Status of Withhold ID the
telephone must be registered with a network.
Call Charge will set the cost of each unit for call charge
information and the required currency in which call
charge is displayed.
Using Max. Cost can restrict use of the telephone to a
specified number of units.
NOTE: The duration of one unit may vary during the
day, peak and off-peak times. Therefore, the call charge
can be calculated accordingly. However, Call charge
information may not give an accurate reflection of the
tariffs charged by your Service Provider.

Call Divert

Call Divert
When Call Divert is enabled the divert icon (t) is
displayed.
You can divert voice, fax and data calls using different
circumstances and to different telephone numbers.
Voice Calls
Fax Calls
Data Calls
Cancel All
Status
When updating or checking the Status of Call Divert the
telephone must be registered with a network.
Security
Security
There are three types of security code for your
telephone:
Lock Code: Controls telephone security – Phone Lock.
Factory-set to "0000".
PIN: Controls SIM security.
PIN2: Controls security for Fixed Dial Store and Call
Charge metering.
It is recommended that you memorise your security
codes. If you forget them contact your dealer for the lock
code or your Service Provider for PIN and PIN2.
Phone Lock will prohibit normal operation of the
telephone. Only emergency calls can be made and
received calls answered. Once the Phone Lock is
enabled the lock icon (O) is displayed. To restore
normal operation, enter your lock code.
24
Phone Lock
Call Bar
Bar Voice
PIN
Bar Fax
PIN2
Bar Data
Fixed Dial
Cancel All
Status
Password