Samsung MCU-S6NEK2N Installation Manual page 26

Wiring
Process
4. MCU 2. Wired remote controller
address and
– Setting for MWR-WE1*N
port setting
1) Press the Delete and Set buttons at the same time for more than three seconds. Then you will
for indoor
unit
2) Assign an indoor unit MCU port address with main menu 4, sub menu 7 (MCU address is
(for wired
remote
controller)
– Setting for MWR-SH1*N
1) Press the top right corner (hidden button) of the display for more than 3 seconds then release it.
2) Assign an indoor unit MCU port address with main menu 4, sub menu 7 (MCU address is
Main menu
26
enter the additional function settings, and the [main menu] will be displayed.
assingned to SEG 12, Port address is assinged to SEG 4). If you want to know the detailed
operation of MWR-WE1*N , refer to installation manual for MWR-WE1*N.
Data bit
Main
Sub-
1 2 3
5 6 4
Menu
menu
Then you can press [ + ]/[ - ] buttons and select No.3 and press [ OK ] button.
assingned to SEG 12, Port address is assinged to SEG 4). If you want to know the detailed
operation of MWR-SH1*N, refer to installation manual for MWR-SH1*N.
Setting
Sub menu
value
Move menu Move page
Main Sub
menu menu
1
2
Indoor unit/
3
4 Ventilator(ERV)
option setting
4
7
Main Sub
Function
menu menu
Page
1 Target address setting
2 Main address setting/Checking
3 RMC address setting/Checking
Setting
4 Basic option setting/Checking
4 address/
option
5 Install option setting/Checking
Install(2) option setting/
6
MCU address setting/checking
7
Port address setting/checking
Setting value
Function
Description
Setting/Checking the MAIN address
address (00H~4FH)
Setting/Checking the MAIN address
product option (00H~4FH)
Refer to the
Setting/Checking the
installation
installation option 1
manual of the
connected
Setting/Checking the
indoor unit/
installation option 2
ventilator (ERV)
MCU address setting/ MCU address
checking (00~15)
Port address setting/ Port address
checking (A~F)
Setting value
value
Target address of indoor
unit (Example: 20 02 1F)
0~4F
(in hexadecimal digits)
0x00~0xFE
Option code
Option code
Option code
Checking
MCU address (00~15)
Port address (A~F)
Factory
default
None
None
None
None
None
Factory
default
None
None
None
None
None