Siemens SIMOTICS CONNECT 400 Operating Instructions Manual page 68

Commissioning
6.2 Commissioning with Android
5. When selecting "variable speed drive (VSD)", select one of the following control modes.
– Vector control
– U/f control
If you are not certain when making the selection, or if the converter is not operated in one
of the specified control modes, then select U/f.
6. Enter the inverter input voltage (V). The inverter output voltage (V) is determined when
entering the inverter input voltage.
66
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL