Replacing A Motor (Ios); Starting The Motor Replacement Wizard - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

8.7

Replacing a motor (iOS)

8.7.1

Starting the motor replacement wizard

Using function "Replace Motor", you can replace the motor configuration without having to
create a new asset in "SIDRIVE IQ Fleet".
You can change the following data:
• Motor type
• Serial number
• Application
• Operating point
• Operating mode
The new motor continues to be monitored under the existing asset name. Data previously
saved in "SIDRIVE IQ Fleet" are not deleted.
The motor replacement wizard guides you step-by-step through the replacement process.
Note
Motor replacement wizard - Help
You can call help using icon
Requirements
• You are logged in to the connectivity module via the "SIDRIVE IQ Config" application.
• The Wi-Fi connection has been set up.
• The SIMOTICS Connect 400 connectivity module is registered with SIDRIVE IQ Fleet.
• You have the necessary authorization (see operating instructions, SIDRIVE IQ Fleet, Section
Activate MindSphere user account > SIDRIVE IQ Fleet roles). Replacing the motor is canceled
with error message "Insufficient rights" if you do not have the appropriate role. Contact your
"SIDRIVE IQ Fleet" tenant administrator.
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL
at the specific step.
Maintenance
8.7 Replacing a motor (iOS)
185