Panasonic KX-P8415 Settings Manual page 6

Settings and Printing
4
Place the media with the print side down under the hooks in the tray.
The height of media should not exceed the limit mark on the tray, or it may cause a jam.
Paper
N
OTES
BMost media has instructions recommending the side to be printed first.
BDo not mix different types or thicknesses of media in the media tray at one time; this may
cause a jam.
BWhen using transparency (3M CG3710), be sure to use the transparency tray and load it
with the leading tape side facing up (3M CG3710) and the taped end under the hooks.
5
Slide the media tray completely into the slot.
N
OTE
BWhen using transparency with leading tape, remove the tape after printing.
Maintenance
Specifications
Transparency
Leading tape side up
6
Contents
Loading Media