Settings and Printing
Printing on Transparency, Label or Envelope (using
Multi-purpose Tray)
1
Set the media thickness switch.
# Open the left side door (#).
The green media thickness switch is located on the paper feeder.
$ Set the media thickness switch depending on media as follows:
Transparency, Label : set to Middle
Envelope: set to Thick
#
2
# Open the multi-purpose tray.
$ Extend the media support.
$
3
Separate the media guides to the approximate width of the media.
Maintenance
#
Specifications
Printing on Transparency, Label or Envelope
Thick
Thin
Middle
52
Contents