Settings and Printing
6
Compare the current color density settings on the Color Calibration Page with
the color density samples on the Color Calibration Card to see if they match.
Place the Color Calibration Page on at least 2 sheets of clean white paper in a well-lighted
area.
Color Calibration
Card
BIf they match, then you do not need to adjust the color density and you may proceed with
any operation you wish to perform.
BIf they do not match, go to the next step.
7
Determine which block on the Color Calibration Page most closely matches
the density of the cyan sample on the Color Calibration Card.
BRepeat this step for each color.
8
Proceed to
the Density for Each Color
Maintenance
"Adjusting the Density for All Colors
Independently".
Specifications
Adjusting the Color Density
Color Calibration Page
Simultaneously" or
22
Contents
Clean white paper
"Adjusting