Mounting; Preparation For Mounting - Siemens SINUMERIK 840D sl Equipment Manual

Mounting

4.1

Preparation for mounting

Table 4-1
Thanks to the tension jacks on the OP 010S, drill-holes or screw holes are not needed.
The OP 010S is supplied with 8 "small" tension jacks. If you have the "large" tension
jacks (6FC5248-0AF06-0AA0) in stock, then you can also use the large tension jacks when
required.
This retaining method also enables the IP65 degree of protection (but only in conjunction
with a circumferential seal and when the protective USB cap is fitted).
Operator panel front: OP 010S
Equipment Manual, 12/2022, A5E50751046B AA
Dimensions of the mounting opening
Width (mm) Height (mm)
285
Mounting depth T3 + clearance (mm)
304 with PCU 50.5
with TCU 30.3
4
120 + 10
69 + 10
23