Stitch Selection - Singer Futura 200 Instruction Manual

START SEWING
3

Stitch Selection

A. Utility Stitch Patterns
For examples of other stitch patterns and further instruction, see the Stitch Reference Guide at
www.singerco.com.
Choosing Utility and Decorative Stitch Patterns:
Adjusting the Width or the Length of the Stitch:
The machine will automatically default to a preset stitch width and stitch length for
optimum results. These settings are displayed on the LCD screen.
You can adjust the width or the length of most stitches by toggling between the
Stitch Width and the Stitch Length Buttons. The button on the left controls the width
and the button on the right controls the length.
1. To increase the width of the stitch press the + button, and to decrease the
2. To increase the length of the stitch press the + button and to decrease the length
The stitch width can be adjusted to 7.0 for most stitches. Some stitches have a limited stitch

width.
The stitch length can be adjusted from 0.0 to 4.5 for most stitches. Some stitches have a limited

stitch length.
22 22
width of the stitch, press the – button. When Utility Stitch Patterns 01 to 05 are
selected, the needle position is regulated by the Stitch Width Adjustment Button.
Pressing – will move the needle to the left and pressing + will move the needle
to the right. On 3.5 the needle is positioned in the center for straight stitch.
of the stitch, press the – button.
B. Decorative Stitch Patterns
The machine will automatically default to the
Pattern Mode and Straight Stitch when turned on.
You can also select the
decorative stitches or the
Numeric Stitch Patterns.
Choose the mode and then press the two left + or
- Pattern Adjustment Buttons to select the number
of the stitch that you desire.
mode for additional
mode for Alpha-