Getting Ready To Sew; Powering Your Machine - Singer Futura 200 Instruction Manual

GETTING READY TO SEW

2

Powering Your Machine

Connect the machine to a power source as illustrated. This machine is equipped with a polarized plug
which must be used with the appropriate polarized outlet. (a and b)
!
Unplug power cord when machine is not in use.
Foot Control
The foot control regulates the sewing speed. When foot control is disconnected, use the Start/Stop
Button to operate the machine.
Sewing Light
Press main switch from OFF(o) to ON (-) for power and light.
!
For machine with a polarized plug (one blade is wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet only one way. If it does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not
modify the plug in any way.
!
Your SINGER
®
Extreme hot and cold temperatures can affect the sewing results.
!
After switching off, residual power may still remain in the machine. This may cause the light to
stay on for a few seconds while the power is consumed. This is normal behavior for an energy efficient
appliance.
12 12
machine is adjusted to provide the best stitch results at normal room temperature.