Table of Contents
Advertisement
Overview
New in this Guide
AP510e Features
AP510e LEDs Status
The AP510e is a next generation, indoor ceiling mount model enterprise class 802.11ax
access point (AP). The "e" in AP510e indicates that it comes with external antennas. The
AP features dual-band radio, eight RP-SMA WiFi ports, one Bluetooth port, and one
internal Bluetooth Low Energy (BLE) antenna. The Bluetooth port can be used for a
remote antenna in place of the internal antenna. The AP has an extended operating
temperature range.
The AP510e can be mounted on a dry or wood wall, solid flat ceiling, junction/gang box,
and on a suspended or drop ceiling.
Note
The AP510e requires a minimum base firmware of WiNG 7.1.1.
New in this Guide
The following sections shows the recent documentation revisions for this guide. Use
this information to locate the latest updates.
April 2023 Revisions
The following table shows the documentation updates for April 2023.
Table 4: New and revised information
Description
Support for the AIO-DQ15021-RPSMA antenna.
on page 9
on page 10
on page 13
Section
Supported antennas
Operational Description of Antenna
Configuration and RF Output Power Setting
AIO-DQ15021-RPSMA Antenna Information
Install the AIO-DQ15021-RPSMA Antenna
ExtremeWireless™ AP510e
9
Advertisement
Table of Contents
