Table of Contents
Advertisement
Mount the AP onto a wall using the Main Mounting
Bracket and the Flat Metal Easy-Attach adaptor
Figure 10: Mounting the access point using the WS-MBI-WALL04 bracket (when
bracket corners are broken off)
2. Connect the LAN cable to the access point.
3. Insert the access point onto the keyhole posts and slide the access point until it lock
into place.
4. Lock the access point into place at about ¼".
Mount the AP onto a wall using the Main Mounting Bracket and the Flat Metal
Easy-Attach adaptor
About This Task
The access point can also be mounted onto a wall or a solid flat ceiling by attaching
a flat metal easy-attach adaptor to the main mounting bracket. The flat metal easy-
attach adaptor (#37210) must be purchased separately.
26
ExtremeWireless™ AP510e
Install the Access Point
Advertisement
Table of Contents
