1
Appliance Overview and Setup
Kit Contents
Specifications
Front Panel Features
Back Panel Features
Removing and Installing the Front Bezel
Installing the Appliance into a Rack
This chapter lists the components shipped with the IA–A–20 and IA–A–300 appliances, describes the
front and back panels, and provides information on appliance specifications.
For complete regulatory compliance and safety information, refer to the document Intel
Products Product Safety and Regulatory Compliance, available at the following links:
http://download.intel.com/support/motherboards/server/sb/g23122003_safetyregulatory.pdf
http://extranet.extremenetworks.com/downloads/pages/NMS.aspx
If you use the extranet URL, after entering your email address and password, you will be on the
NetSight page. Follow this path to the document:
Documentation > Manuals & Release Notes > select a version of NetSight > Mobile IAM and NAC
Appliances.
Kit Contents
The appliance ships with the following components:
•
Extreme Networks URL card
•
Front bezel label
•
A rack mounting kit
•
Two rack handles and appropriate screws
•
AC power cord bracket and cable clamp kit
•
One USB flash drive
Specifications
The physical specifications for the appliances are listed in
requirements are listed in
Table 3: IA-A-20 and IA-A-300 Physical
Specifications
Processor
Processor type
IA-A-20 and IA-A-300 Installation Guide
Table 4: IA-A-20 and IA-A-300 Environmental Specifications
the table
below. The environmental
IA-A-20 - Intel® Xeon® E5-2620 processor
IA-A-300 - Dual Intel® Xeon® E5-2620 processors
®
Server
on page 9.
7