Table of Contents
Advertisement
Overview
the AP. There is no wall mount bracket for the 12V DC power supply. When the device is
powered on, the power LED on the front face of the AP is lit.
Table 6: AP510e Powering Methods
Power Source
Power over Ethernet (PoE)
External 12V DC power supply (optional;
ordering part #37219 - PWR 12VDC, 3A,
2.5mm x 5.5mm connector)
Note
PoE is disabled when external power supply is used.
AP510e Power Table
The following table provides information on the status of the side ports on the access
point when powered using 802.3af and 802.3at technology:
AP510e
Radio 1
Radio 2
BLE
GE1
GE2
Dual band
Dual 5G
AP510e LEDs Status
LEDs Status
The AP510e LEDs are located on the front face of the AP but are not visibly marked.
Description
Power is provided through the RJ45
Ethernet port
back
ports, items #4 and #5) of AP510e,
compliant to be powered with 802.3af
and provides full functionality with
802.3at. This is the preferred method of
powering the AP on ceiling and high wall
installations.
The AP510e can also be powered by an
external DC power supply plugged into
an AC source. Plug the supply's input jack
into the 12V DC
#2) port.
802.3af
2x2 (14dBm)
2x2 (14dBm)
ON
ON
ON
Yes
No
AP510e LEDs Status
(LAN ports on AP510e
(AP510e back
ports, item
802.3at
4x4 (16dBm)
4x4 (16dBm)
ON
ON
ON
Yes
Yes
ExtremeWireless™ AP510e
13
Advertisement
Table of Contents
