Nokia RM-691 Service Manual page 30

54) Then carefully push the A-COVER to the direction
shown to fasten these clips.
56) Tighten the two TORX + size 6 screws to the
torque of 12,5 Ncm in the order shown.
58) Push the A-COVER CHIN into place.
30
55) Press the A-COVER from the sides.
57) Place the KEYMAT into place and press it to lock
its clips.
59) Press the A-COVER CHIN from the top to lock the
two clips on the bottom end.
Conf idential | Copyright © 2011 Nokia | A ll rights reserved
Nokia C7-00
RM-675 / RM-691
Service Manual Level 1&2
Version 6.0