Nokia RM-691 Service Manual page 28

42) Make sure that the LOCK KEY is in the correct
position.
44) Press down also from the bottom end of the
CHASSIS to lock the remaining clips.
46) Tighten these three TORX + size 6 screws to the
torque of 12,5 Ncm in the order shown.
28
43) Apply pressure to the side indicated on the
picture to lock the clip.
45) Use the SS-93 to connect the MAIN FLEX
connector. Be careful not to damage the connector!
47) Remove the adhesive protective film from the
CHASSIS.
Conf idential | Copyright © 2011 Nokia | A ll rights reserved
Nokia C7-00
RM-675 / RM-691
Service Manual Level 1&2
Version 6.0