Nokia RM-691 Service Manual page 15

19) While turning the DISPLAY over, be careful not to
damage the DISPLAY flex.
21) Use the SS-93 to open the MAIN FLEX connector.
Note that CHASSIS ASSEMBLY is Level 3 service level.
23) Lift up the CHASSIS.
15
20) Unscrew the three TORX+ size 6 screws in the
order shown. Do not use them again. Discard them.
22) Use the SS-93 to release the CHASSIS.
24) Use a DC plug to remove the DC JACK.
Conf idential | Copyright © 2011 Nokia | A ll rights reserved
Nokia C7-00
RM-675 / RM-691
Service Manual Level 1&2
Version 6.0