Input Select - Panasonic BT-LH900 Operating Instructions Manual

MAIN MENU

INPUT SELECT

Item Setting
SDI1 * OFF For setting whether the SDI 1 signals can
1
ON be selected when the channels are to be
switched using the INPUT button.
OFF: The SDI 1 signals cannot be selected.
ON: The SDI 1 signals can be selected.
FORMAT AUTO For selecting the signals whose input is to
1080/60I be accepted at the SDI 1 connector.
1080/50I AUTO:
1080/30P
1080/25P 1080/60I:
1080/24P
1080/24PsF
1035/60I 1080/50I:
720/60P
720/60P 1080/30P:
ANAMO
576/50I
480/60I 1080/25P:
1080/24P:
1080/24PsF:
1035/60I:
720/60P:
720/60P ANAMO:
576/50I:
480/60I:
The underlined setting indicates the factory setting mode.
20
Description
All supported signals are accepted.
1080/60I or 1080/59.94I format signals
are accepted.
1080/50I format signals are accepted.
1080/30P or 1080/29.97P format signals
are accepted.
1080/25P format signals are accepted.
1080/24P or 1080/23.98P format signals
are accepted.
1080/24PsF or 1080/23.98PsF format
signals are accepted.
1035/60I or 1035/59.94I format signals
are accepted.
720/60P or 720/59.94P format signals
are accepted.
720/60P or 720/59.94P format signals
which support an anamorphic lens are
accepted.
576/50I format signals are accepted.
480/59.94I format signals are accepted.
Item Setting
SDI2 * OFF For setting whether the SDI 2 signals can
1
ON be selected when the channels are to be
switched using the INPUT button.
OFF: The SDI 2 signals cannot be selected.
ON: The SDI 2 signals can be selected.
FORMAT AUTO For selecting the signals whose input is to
1080/60I be accepted at the SDI 2 connector.
1080/50I The setting selection is the same as for the
1080/30P SDI 1 FORMAT item.
1080/25P
1080/24P
1080/24PsF
1035/60I
720/60P
720/60P
ANAMO
576/50I
480/60I
VIDEO * 1 OFF For setting whether the VIDEO signals can
ON be selected when the channels are to be
switched using the INPUT button.
OFF: The VIDEO signals cannot be selected.
ON: The VIDEO signals can be selected.
FORMAT AUTO For selecting the signals whose input is to
NTSC be accepted at the VIDEO connector.
PAL AUTO:
NTSC:
PAL:
YPBPR * OFF For setting whether the YPBPR/RGB
1
ON signals can be selected when the channels
are to be switched using the INPUT button.
OFF: The YPBPR/RGB signals cannot be
ON: The YPBPR/RGB signals can be
MODE YPBPR For switching between the YPBPR and
RGB RGB analog signals.
YPBPR:
RGB:
*1 Up to three of these items can be set to OFF at the same time. Once the
three items have been set to OFF, it is no longer possible to set a fourth
item to OFF. It is not possible to set all the inputs to OFF.
Description
All supported signals are accepted.
NTSC signals are accepted.
PAL signals are accepted.
selected.
selected.
The analog signals are switched to
Y/Pb/Pr.
The analog signals are switched to RGB.