Supplying The Power - Panasonic BT-LH900 Operating Instructions Manual

Supplying the power

An Anton Bauer, V-mount or other such type of battery pack or an AC power source can be used to power this monitor.
Using the Anton Bauer battery
pack
1
Install the Anton Bauer type of battery pack.
2
Insert the battery pack and slide it in the direction of the
arrow.
Release lever
<Reference>
To remove the battery pack, slide it in the opposite direction
to the one in which it was attached while keeping the
release lever on the battery holder pulled down all the way.
Using a V-mount battery pack
1
Remove the battery holder.
Battery pack
2
Install the accessory metal battery mount.
3
Secure the V-mount adapter using the four screws, and
then secure the two screws of the connector section.
Battery holder
Metal battery mount
V-mount adapter
9