Transfer (Copying) Still Picture; Copying All The Still Pictures On A Card -Copy All Pictures; Gui (Graphical User Interface) Transfer (Copying) - Panasonic Diga DMR-ES45 Operating Instructions Manual

Transfer (Copying) still picture

DVD/VHS
POWER
POWER
DRIVE
TV/VIDEO
SELECT
DRIVE
SELECT
1 2
4 5
Numeric
buttons
7 8
CANCEL 0
RESET RESET
SKIP/INDEX
STOP
∫
TIME SLIP / JET REW
3, 4, 2, 1
ENTER
SUB MENU
SUB MENU
AUDIO DISPLAY
A B
REC REC MODE
[RAM] [SD]
≥You can use SD Memory Cards with capacities from 8 MB to 2 GB
(l 8).
≥Still pictures recorded on CD-R or CD-RW cannot be copied.
[SD]
Put the card in the slot, and the menu (l below) is automatically
displayed. Press [3, 4] to select "Copy Pictures" and press
[ENTER]. Then you can continue from step 4 right.
Notes
≥When copying the still pictures on a album by folder basis
(l 56, To register on a folder by folder basis) or card by card
basis (l right, Copy All Pictures), files other than the still picture
files inside the folder will also be copied. (This does not apply to
the lower folders contained inside the folders.)
≥If still pictures are already contained inside the copy destination
folder, the new still pictures are recorded following the existing
still pictures.
≥If the space on the destination drive runs out or the number of
files/folders to be copied exceeds the maximum, copying will
stop partway through.
≥When a name has not been input for the copy source folder, it is
possible that this folder's name will not be the same on the copy
destination. It is recommended that you input a folder name
before copying (l 48).
≥Print number setting (DPOF) is not copied.
≥The sequence in which the still pictures are registered on the
copy list may not be the same at the copy destination.
VOLUME
CH
TRACKING/V-LOCK TRACKING/V-LOCK
3
CH
6
ADD/DLT
9
CH
DELETE
INPUT
SELECT
SLOW/SEARCH
REW FF
PAUSE PLAY
1
CM SKIP
ENTER
FUNCTIONS
RETURN
RETURN
CREATE
VCR/TV
CHAPTER
STATUS F Rec
SD Card operations
SD Card inserted.
Select an action or press RETURN.
Go to Album View
Copy pictures
ENTER
∫ Copying all the still pictures on a card
—Copy All Pictures
[SD] > [RAM]
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
≥Release protection (disc l 60, cartridge l 60). [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it (l 24, 40).
≥Inserting, Removing the SD card. (l 11)
≥Press [DRIVE SELECT] to select the SD drive.
[1]
While stopped
Press [FUNCTIONS].
[2]
Press [ , ] to select "Other Functions" and
3 4
press [ENTER].
[3]
Press [ , ] to select "Copy all Pictures" and
3 4
press [ENTER].
≥If there is a multiple number of higher folders recognizable, you
can switch them using [2, 1].
[4]
Press [ , , , ] to select "Copy" and press
3 4 2 1
[ENTER].
∫ To stop transfer (copying) in the middle
Press and hold [RETURN] for about 3 seconds or more.
∫ To return to the previous screen
Press [RETURN].
∫ GUI (Graphical User Interface) Transfer
(Copying)
[RAM] [SD]
[1]
While stopped
Press [FUNCTIONS].
[2]
Press [ 3 , 4 ] to select "Copy"and press
[ENTER].
[3]
Set "Copying Direction".
≥If you are not going to change the copy direction, press [4],
then skip to step 4.
∫ To change the setting
(1)Make sure "Copying Direction" is selected and press [1].
(2)Make sure "Source" is selected and press [ENTER].
(3)Press [3, 4] to select the
drive and press [ENTER].
(4)Press [3, 4] to select
"Destination" and press
[ENTER].
(5)Press [3, 4] to select the drive and press [ENTER].
≥The same drive as the copy source can be selected.
(6)Press [2].
(7)Press [4].
[4]
Press [ ] to select "Create List".
4
≥"Mode" does not need to be set as "Content Type" and
"Recording Mode" are automatically set.
Copy All Pictures (JPEG)
Copy from
SD card
\DCIM
Copy to DVD
\JPEG\DCIM001
Copy all pictures (JPEG) in the card
Copy
Cancel All
Source
SD card
Copying Direction
Destination
DVD
Mode
Picture High Speed
RQTV0141
55