Advertisement
Assembly Instructions
Unpacking & Inspection
Your Blizzard straight blade has been packaged to withstand transit and
weather related damage. Fully inspect all components upon receipt of your plow.
In the event of shipping damage or missing parts, immediately contact our
Customer Service Department toll free at 1-888-680-8600.
Begin unpacking and inspection in the following order:
1. Remove packaging slip from the end panel of the pallet wrap. Retain
all documentation for your records.
2.
All wood framing and polyethylene material should be removed from the
pallet for easy access to the snowplow.
3.
Due to the odd shaped components and size of several assembly parts,
various nylon ties and corrugates are used for scratch resistance and
package orientation. Please remove these items prior to assembly.
4.
Place the main blade assembly on a flat, level surface.
Once you have inspected all parts and removed all restraining and protective
packaging materials, your snowplow is ready to be fully assembled.
Pallet Wrap End Panel
The tear resistant woven polyethylene pallet
wrap contains a moisture barrier to help protect
all packaged components and keep out the most
inclement weather during shipping and storage.
The end panel of the pallet cover contains
important information regarding the make, model,
and year of the vehicle the enclosed undercar-
riage is to be installed on. The plow model number
and the serial number of the snowplow are given
together. The first three digits and/or two letters
in the the number indicated is always the plow
model – 800 or 760LD – and the entire seven
(nine) digit number make up the serial number.
The packaging list is also attached to the end
panel. Be sure to retain this list for your records.
Assem. Instructions - Unpacking & Inspection 03
Advertisement
